ETFE (Ethylene Tetrofluoroethylene)

Applications:

• Intravenous catheters
• Fluid transfer
• Electrical insulation

Dimensions:

• OD 0.018" (0.46mm) - 0.300" (7.62mm)
• ID Down to 0.007" (0.18mm)
• Wall thickness: Down to 0.001" (0.025mm)

Tolerances:

• OD ± 0.001" (0.025mm)
• ID ± 0.002" (0.05mm)
• Wall ± 0.0005" (0.013mm)

Configurations:

• Available in cut lengths or on spools
• Heat-shrink tubing
• Custom colors
• Custom compounding

Sterilization: Gas (EtO, radiation (Gamma), steam (autoclave)

Specific gravity: 1.70 - 1.72

Tensile: 5800 psi (minimum)

Elongation: 250% (minimum)

Hardness durometer: D63 - 72

Coefficient of friction: 0.4

Water absorption: 0.005 - 0.007%

Melting point: 490°F (minimum)

Continuous service temperature (no load): 275°F (maximum)

Disclaimer of Warranty and Liability: Data is based on available reference materials and is not guaranteed for any or all applications. Such data is intended as a guideline and does not reflect product specifications for any particular property. Testing and validation of the product is the responsibility of the end user.